1
2
3
4
NU701-5_fra_G4.qxd 31/03/04 10:41 Page 4.02
x76 - KANGOO NU 701-5
C:\Documentum\Checkout\NU701_5_T4-ENG.win 18/6/2004 16:52
-page2
4.02
BONNET
Opening
Pull control 1 towards you.
Lift the bonnet, release stay 3 from
its holder 2 and, for your own safety,
it is very important to fix it into
retainer 4.
Closing
Release the stay and replace it in its
holder 2.
Lower the bonnet and release it
when it is about 8 inches (20 cm)
above its closed position. It will
lock under its own weight.
As a safety measure, check that the
bonnet is fully locked by trying to
lift it.
Before closing the bonnet, check to
make sure that nothing has been left
in the engine compartment.
Check that the bonnet is
properly latched.
Take care when working
under the bonnet as the
engine cooling fan may
start to operate at any
moment.
To Next Page
Loading...
