3
5
4
6
1
2
A
B
C
D
NU701-5_fra_G5.qxd 22/04/04 16:52 Page 5.03
x76 - KANGOO NU 701-5
C:\Documentum\Checkout\NU701_5_T5-ENG.win 21/6/2004 10:22
-page3
5.03
HUBCAPS
Hubcap 1
(masked wheel bolts)
Remove it using a hubcap spanner 3
(located next to the jack), or the end
of the wheelbrace, by inserting the
hook in the hole.
To refit, reclip it in position
ensuring that it is aligned with
mark 2.
Hubcap 5
(masked wheel bolts)
Remove it using a hubcap spanner 3
(located next to the jack), by
inserting the hook in the slot
provided.
When refitting the wheel trim, align
it with the valve 4.
Push the retaining hooks in, starting
with valve side A, followed by B
and C , finishing at the side opposite
valve D.
Hubcap 6
(exposed wheel bolts)
To remove it without removing the
wheel, press it at the points
indicated by the arrows.
Turn it so that the mounting lugs
holding it in place behind the wheel
bolts are released.
To refit the hubcap, proceed in
reverse order.
To Next Page
Loading...
