1.91
HEADLIGHT BEAM ADJUSTMENT
On vehicles fitted with this function,
control A allows you to adjust the height
of the beams according to the load.
Turn control A downwards to lower the
headlights and upwards to raise them.
For manual settings
Examples of positions for adjusting control A according to the load
0 Driver alone or with front passenger
0 Driver with one front passenger and one rear passengers
1 Driver with one front passenger and two or three rear passengers
2
Driver with one front passenger and two or three rear passengers
and luggage
3
Driver with luggage or (load) reaching the maximum permissible
all-up weight
A
For vehicles not fitted with a con-
trol A, the headlight adjustment is
automatic, depending on the vehi-
cle load.
To Next Page
Loading...
