2.64
ENG_UD74986_4
Limiteur de vitesse (X82 PH2 - Renault)
6
1
3
4
Driving
When a limit speed has been set but
not yet reached, driving is similar to
driving a vehicle without the speed lim-
iter function.
Once you have reached the stored
speed, no effort on the accelera-
tor pedal will allow you to exceed
the programmed speed except in an
emergency (refer to information on
“Exceeding the limit speed”).
Switching on
Press the switch 1. The 6 warning light
appears in grey. The “Speed limiter ON”
message appears on the instrument
panel accompanied by dashes to indi-
cate that the speed limiter function is in
operation, waiting to store a limit speed.
To store the current speed, press the 4
switch (RES/+) or the 3 switch (SET/-
): the limit speed replaces the dashes
and, depending on the vehicle, the 6
warning light appears in white.
The minimum stored speed is 19 mph
(30 km/h).
SPEED LIMITER (2/4)
6
To Next Page
Loading...
