2.78
ENG_UD78588_4
Régulateur de vitesse adaptatif (X82 PH2 - Renault)
Exit from standby
Based on the stored cruising speed
If a speed is stored, it can be recalled,
once you are sure that the road condi-
tions are suitable (traffic, road surface,
weather conditions, etc.).
Press switch 7 (RES/+) in the range of
confirmed speeds.
When the stored speed is recalled, acti-
vation of the cruise control is confirmed
by the illumination of the cruising speed
in green.
Note: if the stored speed is higher than
the current speed, the vehicle will ac-
celerate to reach that speed.
Based on the current speed
When the cruise control is set to
standby, pressing switch 6 (SET/-) re-
activates the cruise control function
without taking into account the stored
speed: it is the speed at which the vehi-
cle is moving that is taken into account.
ADAPTIVE CRUISE CONTROL (7/14)
To Next Page
Loading...
