automatic gearbox (use) ............................
(up to the end of the DU)
changing gear ............................................
(up to the end of the DU)
driving ........................................................
(up to the end of the DU)
automatic gearbox selector lever...............
(up to the end of the DU)
gear lever...................................................
(current page)
reverse gear
selecting ...............................................
(up to the end of the DU)
operation....................................................
(current page)
Shift Paddle ...............................................
(up to the end of the DU)
2.99
ENG_UD65779_1
Boîte de vitesses automatique (X82 PH2 - Renault)
Automatic gearbox
AUTOMATIC TRANSMISSION (1/4)
2
Operation
With gear lever 1 in position P, start the
engine.
To move out of position P, you must de-
press the brake pedal before pressing
the unlocking button 2.
With your foot on the brake pedal (warn-
ing light
Ó on the display goes out),
move the lever out of position P.
Only engage D or R when the vehi-
cle is stopped, with your foot on the
brake, the accelerator pedal released
and the engine running.
1
Selector lever 1
P: park
R: reverse
N: Neutral
D: automatic mode
M: manual mode
+: upper gear
–: lower gear
The gear currently engaged is dis-
played on the instrument panel A.
Note: press button 2 to go from posi-
tion D or N to R or P.
Driving in automatic mode
Put lever 1 into position D.
In most road conditions you will en-
counter, you will not need to touch your
lever again: the gears will change au-
tomatically at the right time and at the
most suitable engine speed because
the automatic system takes into ac-
count the vehicle load and road contour
and adjusts itself to the particular driv-
ing style you have chosen.
In some cases (parked on a steep
slope etc.), a lot of the force may
be required to move the gear lever
from the P position to another posi-
tion.
A