1.62
ENG_UD65738_1
Sécurité enfants : choix de la fixation du siège enfant (X82 PH2 - Renault)
CHILD SAFETY: choosing a child, baby seat mounting (2/2)
– Place the headrest in the top position
or remove it;
– pass the belt 2 (supplied with the
seat) between the two rear headrest
rods;
– the hook 3 must be attached to the
ring 4 marked by the symbol
to
the rear of the seat;
– pull the belt so that the child seat
comes into contact with the vehicle
seatback.
The two rings 1 are located between the
seatback and the seat base of the seat
and are identified by a marking
Ü.
Front-facing seat mounting ring for
rear side seats
The third ring is used to attach the
upper strap on some child seats.
1
The ISOFIX anchorage points have been exclusively designed for child seats with the ISOFIX system. Never fit a dif-
ferent type of child seat, seat belt or other objects to these anchorage points.
Check that nothing is obstructing the anchorage points.
If your vehicle has been involved in a road accident, have the ISOFIX anchorage points checked and replace your
child seat.
2
4
3
No modifications may be
made to the component
parts of the restraint system
(seat belts, ISOFIX and
seats and their mountings) originally
fitted.
Check that the seatback
of the forward-facing child
seat is in contact with the
back of the vehicle seat.
In this case, the child seat may not
always rest on the base of the vehi-
cle seat.
To Next Page
Loading...
