Jaune Noir Noir texte
5.4
ENG_UD68153_2
Wheel trip, tools (XBC - Renault)ENG_NU_1321-2_XBC_Renault_5
WHEEL TRIM, TOOLS
Central wheel trim with
visible wheel bolts
(example: wheel trim 1)
Depending on the version,the bolts are
directly accessible directly or after re-
moving the wheel cap.
Never leave tools unse-
cured in the vehicle: there
is a risk that they may be
thrown about during brak-
ing. After use, make sure the tools
are correctly positioned in their
housings: there is a risk of injury.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used for
carrying out repairs underneath the
vehicle or to gain access to the un-
derside of the vehicle.
Accessing the tools
To use jack 2, move the second row
right side seat forward (please refer
the instrucrtions under,”REAR SEATS-
SECOND ROW” in chapter 3) and re-
lease knob 4. Swing out the lever and
take out the jack 2. To store the jack
after use, ensure the jack is located in
the same position, swing out the lever
again and tighten the knob 4.
The wrench 3 is placed along with
warning triangle. Replace it in the same
pouch after use.
1
Jack must be placed only in specific places provided for it. Placing jack
against Rear Axle or Front Transversal Link is strictly prohibited.
3
2
2
3
4
To Next Page
Loading...
