Jaune Noir Noir texte
2.8
ENG_UD68124_2
levier de vitesses (XBC - Renault)ENG_NU_1321-2_XBC_Renault_2
Selecting reverse gear
(vehicle in stationary condition)
Vehicles with manual gearbox: refer
to the grid on the gear lever knob 1.
Depending on variants, pull the re-
lease knob A in upward direction
and then engage the reverse gear.
Shifting the reverse gear should not
be done quickly.
GEAR LEVER, HAND BRAKE (1/2)
Depending on the gradient
and/or vehicle load, it may
be necessary when statio-
nary to apply the brake by
at least a further two notches and
engage a gear (1
st
or reverse gear).
Gear change indicators
Depending on the vehicle, to obtain op-
timum consumption levels, an indicator
light on the instrument panel lets you
know the best time to move up or down
a gear.
An impact to the under-
side of the vehicle while
manoeuvring (e.g.: stri-
king a post, raised kerb or
other street furniture) may result in
damage to the vehicle (e.g.: defor-
mation of an axle).To prevent any
risk of accident, have your vehicle
checked by an approved dealer.
1
A
To Next Page
Loading...
