Reneka International – Instruction of use – Edition 01/2008 – Page 24
GTV nozzle
After each use: Flush the nozzle by opening the steam for 3 - 4 seconds.
At the end of service
Take off the emulsifier tube Clean the GTV nozzle with a sponge
moistened with detergent for milk.
(ref 1011011)
If the nozzle does get clogged up in spite of careful cleaning (no steam when you press the GTV key), take it off and
clean it.
Filter holder
• Clean the whole filter unit and the filter holder by soaking overnight in hot water with two tablets of
reneka detergent
(ref. 1011014).
Do not soak the handles.
• Rinse afterwards with warm water.
Draining rack
• Dismount and clean the grill and draining rack with clear water (do not use abrasive products, to avoids
scratching the metal).
• Clean the collector under the draining rack with a sponge (verify the absence of foreign bodies in the
evacuation bend – There is a risk of spillage from the dish).
Bodywork
• Clean the machine with a wet sponge then wipe carefully with a dry cloth.
BEWARE: The use of abrasive products ruins the surface of the bodywork. Never plunge the machine into
water and never spray it to clean.
To Next Page
Loading...
