Reneka International – Instruction of use – Edition 01/2008 – Page 26
Reconnect the filter-holder Disconnect the filter-holder and perform
with the obturator and perform the cleaning operation on the joint
another 5 cycles of 3 seconds of the brewhead, using the brush
each in order to suitably rinse the
entire circuit
Perform a long cycle to rinse Replace the filter-holder
Restart these operations with all the brewheads which equipped your machine.
Specific cleaning procedure for VIVA S :
Remove the brewhead filter-holder Place the obturator in the two-cup
and empty the remains of the filter-holder
previous preparation
Place a tablet of Reneka detergent Connect the filter-holder
To Next Page
Loading...
