To Next PageTo Next Page
Need help?Do you have a question about the Renesas RA4 Series and is the answer not in the manual?
General| Microcontroller Core | Arm Cortex-M4 |
|---|---|
| Operating Voltage | 1.6 V to 5.5 V |
| Operating Temperature | -40°C to +85°C |
| ADC | 12-bit |
| DAC | 12-bit |
| Communication Interfaces | UART, SPI, I2C, USB, CAN |
| Package | LQFP, QFN, BGA |
| Analog Features | Comparators |
| Maximum CPU Clock Speed | 48 MHz |
Important safety and operational guidelines for using the EK-RA4M1 evaluation kit.
User prerequisites and advisory notes for getting started with the EK-RA4M1.
Configuration options using jumpers on the EK-RA4M1 board.
Default settings for jumpers on the EK-RA4M1 board for initial setup.
Visual representation of the EK-RA4M1's system architecture and components.
Details on the power supply requirements and options for the EK-RA4M1.
Identification and description of the main components on the EK-RA4M1 board.
Configuration and connectivity options for the EK-RA4M1's interfaces.
Details on the pin headers for signal access and power connections.
Capacitor footprints for noise-bypass on analog reference voltage ports.
Details on the 12 MHz and 32.768 kHz crystal clock sources on the EK-RA4M1.
Footprint for installing a potentiometer for user input and variable resistance.
Configuration of the RA4M1 MCU operating mode at boot using the J8 jumper.
Information on various miscellaneous signals and their configurations on the board.
Compliance with FCC, IC, CE, and other EMC/EMI standards for the EK-RA4M1.
Compliance with EU RoHS and China SJ/T 11364 standards.
Compliance with UL 94V-0 safety standard.
