RL78/G13 Clock Generator (Clock Switching) CC-RL
R01AN2831EJ0100 Rev. 1.00 Page 34 of 51
May 28, 2015
5.8.10 Setting to Start Operation of Channel 0 of TAU0
Figure 5.11 shows the flowchart for setting to start the operation of channel 0 of TAU0.
Figure 5.11 Setting to Start Operation of Channel 0 of TAU0
R_TAU0_Channel0_Start
return
TIMIF00 bit
0: Clear interrupt request flag.
TMMK00 bit 0: Enable TAU0 channel 0 interrupts.
TS0 register 0001H
Start operation of channel 0 of TAU0
To Next Page
Loading...
