Renishaw OMP40-2 - Page 13

13
Key to the symbols
LED short ash
LED long ash
Deect the stylus for less than 4 seconds
to move to the next menu option.
Deect the stylus for more than
4 seconds to move to the next menu.
To exit, leave the stylus untouched for
more than 20 seconds.
CAUTION: Do not remove the batteries whilst in conguration mode.
To exit, leave the stylus untouched for more than 20 seconds.
LED check
> 5 s
1
2
3

Battery status
Battery good
or
Battery low
Changing the probe settings
Deect the stylus and hold it deected
until after the battery status has been
displayed at the end of the review
sequence.