Do you have a question about the Renishaw TP20 and is the answer not in the manual?
Sensor Type | Strain gauge |
---|---|
Stylus Tip Diameter Range | 0.3 mm to 6 mm |
Mounting | M8 thread |
Shank Mounting | M2, M3, M4, M5, M6, M8 |
Stylus change | Automatic |
Operating Temperature | 10°C to 40°C |
Storage Temperature | -25°C to 70°C |
Stylus Module Type | Standard, Medium, Extended, Low force |
Interface | Compatible with Renishaw interfaces |