TCR20 is a compact probe module rack for use with PH20 that provides the capability for quick and repeatable tool changing and tip
correction.
Based on the industry standard range of MCR20 rack systems, TCR20 securely stores modules for rapid automatic changing, protecting
mating surfaces from any airborne contaminants within the working envelope of the machine.
TCR20 carries the full range of TP20 modules which are compatible with the PH20 system and can accommodate up to six module / stylus
combinations.
TCR20 features an integrated tip datum artefact in the centre of the rack assembly, minimising the cycle time of the tip correct procedure.
Tip correction is key when the highest level of accuracy is required. It compensates for any residual variations following a tool change,
maintaining a market leading level of accuracy from PH20.
The TCR20 module change rack kit is not supplied with any TP20 probe modules. It can be ordered from your supplier under the following
part number:
Part number Description
A-1371-1001 TCR20 rack kit
To Next Page
Loading...
