Renishaw RMI User Manual

Installation and user’s guide
H-2000-5220-05-A
RMI - radio machine interface

Renishaw RMI Specifications

General

Brand	Renishaw
Model	RMI
Category	Recording Equipment
Language	English

Summary

Document Introduction and Safety

Safety Information

Covers user safety and machine supplier responsibilities for safe operation.

RMI Product Overview

Describes the RMI as a radio transceiver and machine interface, with power details.

RMI Visual Diagnostics

LED Indicator Signals

Explanation of LED indicators for battery, probe status, error, and signal strength.

LOW BATTERY / START Status

PROBE STATUS Indicators

ERROR and SIGNAL Status

RMI Outputs and Specifications

Probe Status Output Details

Specifications for Probe Status 1, 2a, and 2b outputs (SSR and voltage driven).

Error and Low Battery Output Details

Specifications for Error and Low Battery outputs (SSR).

Output Electrical Cautions

RMI Output Waveforms

Probe Status Waveforms

Illustrates waveforms for Probe Status 1, 2a, and 2b in various modes.

Error and Low Battery Waveforms

Illustrates waveforms for Error and Low Battery conditions.

Switch and Start Input Configuration

Switch SW1 Output Configuration

Configuration settings for Switch SW1, affecting output modes like Pulsed and Level.

Switch SW2 Output Configuration

Configuration settings for Switch SW2, including Probe Status 2a/2b and Machine Start modes.

Machine Start Input Configuration

Wiring Diagram

RMI Electrical Connections

Diagram illustrating RMI connections for outputs, power supply, and machine start.

Wiring Cautions

RMP60-RMI Partnership

System Setup and Trigger Logic

Partnering Procedure

Step-by-step guide for pairing an RMP60 with the RMI.

Cable Exit Conversion

Side to Rear Exit Procedure

Conversion Procedure Caution

Fault Finding and Troubleshooting

No Power or LED Issues

Probe Status and Error LED Issues

Flashing LEDs and Reduced Range