Need help?Do you have a question about the Renishaw RMP600 and is the answer not in the manual?
Introduces the Renishaw RMP600 probe and its quick-start guide.
Covers essential safety guidelines for users and installers regarding operation and hazards.
Details compatible battery types, safe usage practices, and proper disposal procedures.
Step-by-step instructions for attaching the stylus to the probe.
Procedure for safely installing probe batteries, emphasizing polarity and contact integrity.
Guide for securely mounting the probe onto a machine shank.
Initial setup and configuration of probe settings using available techniques.
Method to check current probe configuration and operational states.
Process for pairing the probe with RMI-Q or RMI-QE receivers.
Modifying probe settings after initial setup and partnering.
Guide for achieving accurate stylus on-centre alignment for precise measurements.
Instructions for cleaning the RMP600 probe using a clean cloth.
Interpreting RMI-Q LED status indicators for troubleshooting and status checks.
Interpreting RMI-QE LED status indicators for troubleshooting and status checks.
Details on product warranty, disclaimers, trademarks, and compliance statements.
List of relevant patents and radio frequency approvals.
General| Transmission type | Radio |
|---|---|
| 3D trigger probe | Yes |
| Environmental Conditions | IPX8 rated |
| Range | Up to 15 m |
| Repeatability | 1 µm |
| Transmission | Radio transmission |
| Typical battery life | Up to 6 months |
| Probe Interface | Radio transmission |
| Dimensions | Ø63 mm x 76 mm |
| Battery life | Typical battery life |
To Next Page
