Need help?Do you have a question about the Renishaw LP2 and is the answer not in the manual?
General| Brand | Renishaw |
|---|---|
| Model | LP2 |
| Category | Measuring Instruments |
| Language | English |
Safety precautions for LP2 system installation and operation.
Installer's responsibility for compliance with regulations and guidelines.
Explanation of how the probe generates a trigger signal and machine response.
Procedures and circumstances for calibrating the LP2 probe system.
Overview of LP2 probe variants, their applications, and transmission types.
Specifications for weight, sense directions, repeatability, and trigger force.
System configuration for LP2 probe on machining centres using radio transmission.
System setup for LP2 on machining centres with optical transmission interfaces.
System configuration for LP2 on machining centres with OMM-2C optical interface.
System diagram for LP2 probe on machining centres with hard-wired transmission.
System setup for LP2 probe on lathes using radio transmission.
System diagram for LP2 probe on lathes using optical transmission.
To Next Page
