Need help?Do you have a question about the Renishaw OMP400 and is the answer not in the manual?
General| Measurement range | ± 0.5 mm |
|---|---|
| Resolution | 0.1 µm |
| Type | Optical probe |
| Repeatability | 1.00 μm (2σ) |
| Operating temperature | 0 to 50 °C |
| Transmission method | Optical |
| Unidirectional repeatability | 0.5 µm |
| Stylus length | Up to 50 mm |
| Activation force XY | 0.5 N |
| Activation force +Z | 0.5 N |
| Activation force -Z | 0.5 N |
| Sealing | IP54 |
| Protection Rating | IP54 |
| Output | Digital |
Covers transmission methods, modes of operation, switch-on/off, and auto-reset.
Installing OMP400 with OMI receivers and understanding performance envelopes.
Installing OMP400 with OMM receiver and understanding performance envelopes.
Covers fitting stylus, batteries, mounting, adjustment, and calibration.
Visual guide to interpreting LED feedback for probe settings.
Step-by-step guide to entering configuration mode and changing settings.
To Next Page
