Renishaw OMP400 - Stylus On-Centre Adjustment

3.9
System installation
1
2
3
Stylus on-centre adjustment
NOTES:
If a probe and shank assembly is dropped, it must be rechecked for correct on-centre adjustment.
Do not hit or tap the probe to achieve on-centre adjustment.
(x4)
1.5 Nm - 2.2 Nm
(1.1 lbf.ft
- 1.7 lbf.in)
(x2)
1.5 Nm - 2.2 Nm
(1.1 lbf.ft - 1.7 lbf.in)
(x4)
360°
360°
360°