25
Use as table device
• Place the power amplifier on a straight, horizontal surface.
• The setup surface must not be sensitive to heat.
Use in a rack
• We recommend using a rack that can be opened from both sides, because it permits for easier installa
-
tion and connection.
• The power amplifier’s front plate has four attachment holes. Attach the device in the rack with four suf
-
ficiently large screws.
• Attachment at the front plate alone, however, is not sucient for secure attachment. Additionally, even
attachment must be provided for by side and bottom rails. The respective rack producers oer dierent
options for this.
To Next Page
Loading...