Need help?Do you have a question about the Renkus-Heinz P2700 and is the answer not in the manual?
Essential safety instructions to prevent electric shock, fire, and equipment damage.
Indicates amplifier operating status and protective circuit activation for each channel.
Shows signal level and clipping status for each amplifier channel.
Controls the gain level for each amplifier channel.
The main switch to turn the amplifier's power on and off.
Details AC fuse rating and correct voltage connection for safe operation.
Describes Neutrik Speakon connectors for amplifier audio outputs.
Selects between Stereo, Parallel, and Bridge operating modes.
Explains balanced XLR input connectors for audio signals.
XLR connectors for passing audio signals to additional amplifiers.
Functionality of the ground lift switch to reduce hum.
Details the C12 module for single-channel systems, providing crossover and protection.
Details the C22 module for stereo systems, offering protection and filtering.
Guidelines for rack mounting and ensuring adequate airflow for the amplifier.
Guidance on selecting appropriate speaker wire gauge based on length and load.
Steps to safely test and verify system connections and amplifier functionality.
General| Channels | 2 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 20 kOhms balanced |
| Cooling | Variable speed fan |
| Power 8 ohms | 700 W |
| Protection | Short circuit, DC voltage, thermal overload |
| Dimensions | 19" x 3.5" x 16.5" (483 x 89 x 419 mm) |
To Next Page
