Need help?Do you have a question about the Renogy RIV4835CSH1S and is the answer not in the manual?
General| Brand | Renogy |
|---|---|
| Model | RIV4835CSH1S |
| Category | Battery Charger |
| Language | English |
Covers general safety guidelines for installation and operation.
Safety precautions related to battery handling and charging.
Guidelines for safe installation of the unit.
Highlights the main capabilities and functionalities of the inverter charger.
Explains the four operational modes for charging the battery banks.
Details the three modes dictating how incoming power is used for loads.
Labels and describes the physical components of the inverter.
Provides physical measurements and diagrams of the unit.
Details the Renogy BT-2 Bluetooth Module and its function.
Provides guidelines for selecting an optimal installation location.
Lists additional safety precautions during installation.
Crucial warnings and cautions for wiring procedures.
Specifies recommended wiring and circuit breakers for battery and PV.
Instructions for connecting AC output, including safety warnings.
Guidelines for connecting AC input, with warnings.
Details Dry Contacts, RS485/CAN, and USB ports.
Describes the basic operation using LCD indicators and buttons.
Explains the meaning of various icons displayed on the LCD screen.
Describes what information is shown on the left and right sides of the LCD.
Lists the real-time data available through the LCD menu navigation.
Guides users on how to enter and navigate parameter settings.
Explains programmable settings for load modes and output frequency.
Describes programmable settings for AC input and power setpoints.
Covers programmable settings for battery charging modes.
Details programmable settings for max charging current and battery types.
Describes programmable settings for boost, float, and delay times.
Details settings for undervoltage alarms and equalization.
Explains settings for power saving, auto-start, alarms, and bypass.
Protection against PV issues and low/over voltage input.
Protection against battery issues and load short circuits.
Protection against over-temperature, overload, and polarity issues.
Lists and describes various fault codes and their meanings.
Provides solutions for common fault conditions displayed on the screen.
Recommends periodic inspections for optimal performance.
Details technical specifications for utility, grid, and inverter functions.
Lists specifications for AC/PV charging and general product details.
Details specific parameters for SLD/AGM, GEL, and FLD battery types.
Details specific parameters for Lithium Iron Phosphate and Lithium-ion types.
Defines parameters related to voltage, charging, and recovery.
Defines discharge limit voltage and FCC compliance.
To Next Page
