Battery Charging Modes:
05
The solar inverter will have 4 operational charging modes which changes the logic as how and
when to charge the battery banks. The solar inverter has four working modes: PV priority, Utility
Priority, Hybrid Charging, and Only Solar Charging.
PV Priority
In PV Priority mode it will make full use of the solar input during the day in order to charge the
battery bank. This effectively allows using the unit off-grid during peak utility times in order to
cut costs on utility charging. Only when solar fails to start or is interrupted will the unit
automatically switch to utility mode for backup.
Photovoltaic Modules (PV): convert light energy into DC power, charge the battery through
the solar inverter charger, or directly reverse into alternating current to power the load.
PV
UTILITY
48V Battery Storage
Power or generator (Utility): Access at the AC input can power the load and charge the
battery. If you do not have a power supply or generator, the system can also operate normally,
where the load is supplied by batteries and photovoltaic modules.
Battery: The role of the battery is to ensure the normal use of electricity for the system load
when the solar energy is insufficient and there is no electricity.
Household load: Can be accessed to a variety of household and office loads, including
refrigerators, lamps, televisions, fans, air conditioning and other AC loads.
CHARGINGCHARGING
To Next Page
Loading...
Need help?
General
