Renu Electronics FlexiPanels Basic HMI FP2070TN-V2 - USB Ports; USB Device Port; USB Host Port

FlexiPanels
®
Basic HMI
© Renu Electronics Pvt. Ltd.
Page 15 of 20
USB Device Port
FP2-V2 products support one Micro USB compliant with USB 2.0 specification port for programming and
monitoring.
Pin number
Signal
1
VCC
2
D-
3
D+
4
NC
5
GND
USB Host Port
FP2-V2 products support one USB Host compliant with USB 2.0 specification port. USB Host can handle
only USB memory stick devices and can source current up to 150mA only.
The connector used: Standard USB Type a Female connector.
Pin number
Signal
1
VCC
2
D-
3
D+
4
GND
Currently USB Host can be used for Upload and Download of Application/ Firmware only. Upload and
Download of Data Logging or Recipe over USB is not supported.
1
5