Need help?Do you have a question about the Renu Electronics FlexiPanels Basicc FP2 Series and is the answer not in the manual?
Guidance for users before operating or installing the FlexiPanels® FP2 series HMI with I/Os products.
Guidelines for front panel mounting of FP2 series HMI with I/Os products.
Requirements for panel thickness and surface flatness for proper sealing and IP rating.
Specifications for panel cutout dimensions for different FP2 HMI models.
Specifies required clearances around the HMI for adequate ventilation and heat dissipation.
Instructions on how to mount the FP2 HMI on a panel using clamp accessories and ensuring water/dust resistance.
Details on connecting a 24VDC power supply and the power ratings for various FP2 models.
Explains the part numbering system for FP2 series HMI with I/Os, detailing model variants and features.
Details the DB9 female port supporting RS232 and RS485 signal levels and its pinout.
Description of the special 'Y' cable for using RS232 and RS485 communication levels simultaneously.
Pinout details for the terminal block (COM1) and DB9 female port (COM2) on FP2070 series HMIs.
Details the Micro USB programming cable, including its part number and available lengths.
Details the RS-232 communication cable, including its part number and available lengths.
General| Brand | Renu Electronics |
|---|---|
| Model | FlexiPanels Basicc FP2 Series |
| Category | Recording Equipment |
| Language | English |
To Next Page
