FlexiPanels
®
Advance HMI
Page 3 of 17
© Renu Electronics Pvt. Ltd.
Introduction
FP4 Advance HMI series is a powerful, feature rich and versatile HMI product range with a
complete range of screen size starting with compact 4.3” WQVGA TFT color display, covering
most popular screen sizes in the industry (7”, 10.1”, 12.1”), till dynamic 15” XGA TFT color screen.
These HMIs are powered by FlexiSoft
®
programming software and supports a powerful FlexiSoft
®
runtime for efficient performance. IEC61131-3 logic programming environment support give a
unique edge to these products.
All the products are compliant to EMC directive 2014/30/EU and LVD directive 2014/35/EU and
suitable for installation in hazardous locations, because they are listed for UL Class I Div. 2.
This user manual gives detailed information regarding the hardware specifications, operating
conditions, installation, mounting and wiring. All the information published in this manual is
produced and governed by Renu Electronics Pvt. Ltd. and is protected by Indian Copyright Act.
Before you start
FlexiPanels
®
FP4 series products are general purpose human machine interface devices,
suitable for a variety of industrial applications across various industries. However, Renu
Electronics is not responsible or liable for any indirect or consequential damage resulting from
the use of this product.
The user should check and confirm the suitability of the product before using in any specific
application.
The diagrams and examples in this manual are included for illustration purpose only. Renu
Electronics assume no responsibility or liability regarding actual use based on these diagrams
or examples.
Reproduction of the contents of this manual, in any form (in part or in whole), is strictly
prohibited.
Following table shows various symbols that may be used in this manual to provide information
regarding safety, precautions and usage of the product:
To Next Page
Loading...
