Camera Introduction
Battery Status LED
Set up the Camera on Smartphone
Red Light: WiFi connection failed
Blue Light: WiFi connection succeeded
Blinking: Standby status
On: Working status
Set up the Camera
NOTE: Always keep the rubber plug closed firmly.
Speaker
Spotlight
Lens
Daylight Sensor
Reset Button
Dierent states of the status LED:
Status LED
Built-in Mic
PIR Motion Sensor
Power Switch
Micro SD Card Slot
* Press for more than five seconds to reset
the device to factory settings.
Micro USB Power Port
Step 1 Scan to download the Reolink App from the App Store or Google Play store.
Step 2 Turn on the power switch to power on the camera.
EnglishEnglish
ON
MicroSD
MicroSD
Switch
3 4
To Next Page
Loading...
