Reolink Argus 3 Series - Install the Camera; Camera Installation Position and Mounting

Install the Camera with Loop Strap
Place the Camera on a Surface
Thread the loop strap
through the slots and
ĶóơƭĞŦƭľĞơƭƙóƖɔUƭŃơƭľĞ
most recommended
installation method if you
plan to mount the camera
ƭŲƭľĞƭƙĞĞɔ
10English
9 English
Screw the camera to
ƭľĞďƙóĐŘĞƭɔ
Adjust the camera angle to
ķĞƭƭľĞďĞơƭȊĞśėŲĶǍŃĞǎɔ
Secure the camera by turning
the part on the bracket
ŃėĞŦƭŃȊĞėŃŦƭľĞĐľóƙƭ
ĐśŲĐŘǎŃơĞɔ
NOTE:
¾ŲóėŕƵơƭƭľĞĐóŤĞƙóóŦķśĞśóƭĞƙɏƖśĞóơĞśŲŲơĞŦƭľĞďƙóĐŘĞƭďǔƭƵƙŦŃŦķƭľĞƵƖƖĞƙƖóƙƭóŦƭŃĐśŲĐŘǎŃơĞɔ
3 4
5
If you plan to use the camera
ŃŦėŲŲƙơóŦėƖƵƭŃƭŲŦóȋóƭ
surface, you may place the
camera into the stand bracket
and adjust the camera angle
by slightly rotating the camera
ďóĐŘóŦėĶŲƙƭľɔ