Reolink Wireless Battery-powered Camera
Charge the Battery
Reolink Argus 2/Argus Pro has its rechargeable battery which is removable, and
there is a micro USB port for charging on the back of the battery.
The charger is a USB adapter (DC 9/5 Volts, not included in the box) which is
commonly used for smartphones. A micro USB cable is included in the box.
Here we’ll guide you to charge Reolink Argus 2/Argus Pro by using the following
three different methods.
Method 1: Pull out the battery and open the charging port, then connect the
battery with the USB adapter via a USB cable and plug it into the electrical outlet.
To remove the battery from
the camera, please pull the
button on the top of the
battery and slide it upwards.
To Next Page
Loading...
Need help?
General
