EasyManuals Logo

Reolink D800 User Manual

Reolink D800
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background image
8English7 English
Specifications
• Please check if the camera is powered on. Reset the camera and cover
the daylight sensor on the camera lens or turn o the lights for a few
seconds to see if the infrared LEDs will turn on.
If these won’t work, please contact Reolink Support
https://support.reolink.com/.
If you fail to upgrade firmware for the camera, please try the following
solutions:
• Confirm the current firmware version to see if it is the latest one.
• Make sure that you download the correct firmware from download
center.
• Make sure the network of your computer is stable.
If these won’t work, please contact Reolink Support
https://support.reolink.com/.
Night Vision: 30 meters (100ft)
Day/Night Mode: Auto switchover
Hardware Features
IP Camera is not Powering on
Troubleshooting
Camera Video Loss on Reolink PoE NVR
Failed to Upgrade Firmware
If there is video loss on Reolink PoE NVR, please try the following
solutions:
• Please login to the NVR and go to Menu -> IP Channel to check if the
camera is assigned a specific channel number and check the status
of the channel that doesn't show.
• If the camera has the channel number and the channel status shows
Incorrect Password, you may drag bottom slider to the right and enter
the camera password again. Next, click Apply to save the change. If the
status shows Oine, try to connect the camera to other ports on the
Reolink NVR or try with another Ethernet cable.
If your camera is not powering on, please try the following solutions:
• Plug the camera into another POE port on the NVR.
• Try with another Ethernet cable.
• If you have a 12V power adapter, power up the camera with the power
adapter.
If these won’t work, please contact Reolink Support
https://support.reolink.com/.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reolink D800 and is the answer not in the manual?

Reolink D800 Specifications

General IconGeneral
Sensor typeCMOS
Number of sensors1
Optical sensor size1/2.8 \
Fixed focal length4 mm
Maximum aperture number2
Video streamingYes
Total megapixels8 MP
Maximum resolution3840 x 2160 pixels
Video compression formatsH.265
Noise reduction technology3D noise reduction
TypeIP security camera
Placement supportedOutdoor
Connectivity technologyWired
LED typeIR
Infra-red wavelength850 nm
Night vision distance30 m
Number of illumination LEDs18
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet interface typeFast Ethernet
Supported network protocolsSSL, TCP/IP, UDP, UPNP, NTP, DHCP, DNS, DDNS
DC output current1 A
DC output voltage12, 48
Power source typeDC, PoC
Power consumption (max)12 W
Form factorDome
Mounting typeCeiling/wall
Product colorWhite
Protection featuresWaterproof
International Protection (IP) codeIP66
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Height93 mm
Weight385 g
Diameter105 mm

Related product manuals