EasyManua.ls Logo

Reolink Go

Reolink Go
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Please charge the rechargeable battery with a standard and high-quality DC 5V or 9V battery charger.
2. If you want to power the battery via the solar panel, please note that the battery is ONLY compatible with
Reolink solar panel. You cannot charge the battery with other solar panel brands.
3. Please charge the battery in temperatures between 0°C and 45°C.
4. Always use the battery in temperatures between -20°C and 60°C.
5. Please make sure the battery compartment is clean.
6. Please keep the USB charging port dry, clean and free of any debris and make sure the battery contacts
are aligned.
7. Always make sure the USB charging port is clean. Please cover the USB charging port with the rubber
plug after the battery has been fully charged.
ȗɔvĞǍĞƙĐľóƙķĞɏƵơĞŲƙơƭŲƙĞƭľĞďóƭƭĞƙǔŦĞóƙóŦǔŃķŦŃƭŃŲŦơŲƵƙĐĞơɏơƵĐľóơȊƙĞŲƙľĞóƭĞƙơɔ
9. Always store the battery in a cool, dry and ventilated environment.
10. Never store the battery with any hazardous or combustible objects.
11. Do keep the battery away from children.
12. Do not short-circuit the battery by connecting wires or other metal objects to the positive (+) and
negative (-) terminals. Do NOT transport or store the battery with necklaces, hairpins or other metal objects.
ȐȒɔ(Ųv¾ėŃơóơơĞŤďśĞɏĐƵƭɏƖƵŦĐƭƵƙĞɏơľŲƙƭɲĐŃƙĐƵŃƭƭľĞďóƭƭĞƙǔɏŲƙŤóŘĞŃƭėŃơƖŲơĞŲĶŃŦǎóƭĞƙɏȊƙĞɏ
microwave ovens and pressure vessels.
Ȑȓɔ(Ųv¾ƵơĞƭľĞďóƭƭĞƙǔŃĶŃƭķŃǍĞơŲȅóŦŲėŲƙɏķĞŦĞƙóƭĞơľĞóƭɏďĞĐŲŤĞơėŃơĐŲśŲƙĞėŲƙėĞĶŲƙŤĞėɏŲƙ
appears abnormal in any ways. If the battery is being used or charged, remove the battery from the device
or the charger immediately, and stop using it.
15. Always follow the local waste and recycle laws when throwing the used battery away.
How to Install
Wall Mount
Use the allen wrench to loose the
screw.
Step 1
Screw the wall mount into the wall.
Step 2
Screw the camera to the wall mount
and adjust the camera to the proper
direction.
Step 3
Tighten the screw using the allen
wrench.
Step 4
12 English 13English

Other manuals for Reolink Go

Related product manuals