EasyManuals Logo
Home>Reolink>Digital Camera>RLC-510A

Reolink RLC-510A Operational Instruction

Reolink RLC-510A
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Camera is not Powering On
If your camera is not powering on, please try the following solutions:
• Make sure your camera is powered properly. The PoE camera should
be powered by a PoE switch/injector, the Reolink NVR or a 12V
power adapter.
• If the camera is connected to a PoE device as listed above, connect
the camera to another PoE port and see if the camera will power on.
• Try again with another Ethernet cable.
If these won’t work, contact Reolink Support https://support.reolink.com/.
Troubleshooting
Infrared LEDs Stop Working
If the Infrared LEDs of your camera stop working, please try the
following solutions:
• Enable infrared lights on Device Settings page via Reolink App/Client.
• Check if the Day/Night mode is enabled and set up auto infrared lights
at night on Live View page via Reolink App/Client.
• Upgrade the firmware of your camera to the latest version.
• Restore the camera to factory settings and check out the infrared light
settings again.
NOTE: If your camera has another mount without the adjusting knob,
please loosen the adjusting screw with the provided hex key and turn the
camera as shown below to adjust the angle.
12English
11 English
5
90°
360°

Other manuals for Reolink RLC-510A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reolink RLC-510A and is the answer not in the manual?

Reolink RLC-510A Specifications

General IconGeneral
Form factorBullet
WeatherproofYes
Mounting typeCeiling/wall
Product colorWhite
Housing materialAluminum
International Protection (IP) codeIP66
Sensor typeCMOS
Number of sensors-
Optical sensor size1/2.7 \
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
Number of lenses1
LED typeIR
Infra-red wavelength850 nm
Night vision distance30 m
Number of illumination LEDs18
Total megapixels5 MP
Maximum resolution2560 x 1920 pixels
Video formats supportedH.264
Minimum illumination- lx
DC output current1 A
DC output voltage12
Power source typeDC, PoE
Power consumption (typical)12 W
Wi-FiNo
Number of users20 user(s)
Networking standardsIEEE 802.3af
Ethernet interface type10 Gigabit Ethernet, 100 Gigabit Ethernet
Supported network protocolsHTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size256 GB
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Mobile operating systems supportedAndroid, iOS
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Height67 mm
Weight425 g

Related product manuals