Reolink PoE Camera
User Manual
2. Setup and Installation
Power on PoE Cameras
You may power on Reolink PoE cameras via PoE injector/switch or PoE NVR
directly, or by using the power adapter.
Method 1: Power via PoE Injector/Switch
For Reolink RLC-423, you need to make sure that the PoE injector/switch
is 802.3at compliant (48V) and supports active mode.
For other Reolink PoE cameras, please make sure that the PoE injector/switch
is 802.3af compliant (48V) and supports active mode.
To Next Page
Loading...
