Reolink RLC-510WA - Camera Introduction; Connection Diagram

Connection Diagram
Before initial setup, follow the steps below to connect your camera.
1. Connect the camera to a LAN port on your router with an Ethernet cable.
2. Power on the camera with a power adapter.
Power Adapter
Router
WiFi IP Camera
Power Cable
Network Cable
4English
3 English
Camera Introduction
Network Cable
Infrared Lights
High Definition Lens
Mount
Metal Aluminum Case
Antenna
Daylight Sensor
Reset Button
Power Cable
Built-in Mic
* Press for about 10 seconds to restore factory settings.