EasyManuals Logo
Home>Reolink>Security Camera>RLC-810A

Reolink RLC-810A User Manual

Reolink RLC-810A
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
6English
5 English
Connection Diagram
Before using the camera, please connect your camera as instructed
below to finish initial setup.
1. Connect the camera to a Reolink NVR (not included) with an Ethernet
cable.
2. Connect the NVR to your router, and then power on the NVR.
PoE IP Camera
Power Adapter
Reolink NVR *
Ethernet Cable
Ethernet Cable
Router
NOTE: The camera should be powered with a 12V DC adapter or a PoE
powering device such as PoE injector, PoE switch or Reolink NVR
(not included in the package).
* You may also connect the camera to a PoE switch or PoE injector.
NOTE:
• Dierent types of cameras are introduced in this section. Please check
out the camera included in the package and check out the details from
the correpsonding introduction above.
• The actual appearance and components may vary with dierent
model of product.
NOTE:
• Dierent types of cameras are introduced in this section. Please check
out the camera included in the package and check out the details from
the correpsonding introduction above.
• The actual appearance and components may vary with dierent
model of product.
VGAHDMIUSB
AUDIO
OUT
DC 48V
ON
2 4 6 8
1 3 5 7
OFF
LAN
eSATA
Mount
Metal Aluminum Case
Infrared Lights
Daylight Sensor
High Definition Lens
Spotlight
Speaker
Built-in Mic

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reolink RLC-810A and is the answer not in the manual?

Reolink RLC-810A Specifications

General IconGeneral
TypeIP security camera
Day/night modeYes
Placement supportedIndoor & outdoor
Connectivity technologyWired
Form factorBullet
Mounting typeCeiling/wall
Product colorWhite
Housing materialAluminum
International Protection (IP) codeIP66
Built-in HDDNo
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size256 GB
DC output current1 A
DC output voltage12
Power source typeDC, PoE
Number of users20 user(s)
Networking standardsIEEE 802.3af
Supported network protocolsHTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Ethernet LAN (RJ-45) ports1
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Sensor typeCMOS
Number of sensors-
Optical sensor size1/2.49 \
Minimum illumination- lx
LED typeIR
Infra-red wavelength850 nm
Night vision distance30 m
Number of illumination LEDs18
Total megapixels8 MP
Maximum resolution3840 x 2160 pixels
Video formats supportedH.265
Mobile operating systems supportedAndroid, iOS
Weight and Dimensions IconWeight and Dimensions
Depth196 mm
Height66 mm
Weight485 g

Related product manuals