Reolink RLC-823S1 - Panoramica Della Telecamera; Schema DI Collegamento

Italiano Italiano51 52
Panoramica della telecamera Schema di collegamento
Before using the camera, please connect your camera as instructed
below to nish initial setup.
1. Connect the camera to a Reolink NVR (not included) with an Ethernet
cable.
2. Connect the NVR to your router, and then power on the NVR.
NOTE: The camera should be powered with a 12V DC adapter or a PoE
powering device such as PoE injector, PoE switch or Reolink NVR
(not included in the package).
* You may also connect the camera to a PoE switch or PoE injector.
PoE IP Camera
Ethernet Cable
NVR Reolink
Router
Cavo Ethernet
Adattatore di alimentazione
Staa
Sensore di luminosità
Microfono
Obiettivo
LED IR
Faretto
Slot per scheda microSD
Pulsante di reset
Porta LAN
Altoparlante
Porta di alimentazione
(opzionale)
1
2
3
4
5
6
7
8
10
9
11
2
1
3
4
5
6
9
10 11
8
7
VGAHDMIUSB
AUDIO
OUT
DC 48V
ON
24 68
13 57
OFF
LAN
eSATA