REP PRA-1700-S - User Manual

STILL NEED HELP WITH ASSEMBLY?
VISIT OUR ASSEMBLY LIBRARY HERE:
HELP.REPFITNESS.COM
ASSEMBLY INSTRUCTIONS
WWW.REPFITNESS.COM
45-0225-V1
SELECTORIZED LAT
PULLDOWN & LOW ROW
PRA-1700-S
MULTI-USE WRENCH
2X INCLUDED
10-0312
4MM
1X INCLUDED
10-0350
17MM WRENCH
2X RECOMMENDED
19MM WRENCH
1X OPTIONAL

Summary

Assembly Instructions Introduction

Required Assembly Tools

Lists necessary wrenches and tools for assembly.

Hardware and Parts Inventory

Hardware Components

Lists all screws, nuts, washers, and bolts for assembly.

Machine Parts List

Details all structural and functional components of the machine.

Safety and Operational Precautions

General Safety Warnings

Essential safety advice for installation and use.

Cable Seating Verification

Crucial check to ensure cables are correctly seated in pulley grooves.

Step-by-Step Assembly Guide

Frame Assembly (P1-P2)

Assemble the primary frame structure and reinforcements.

Pulley and Cable System Setup

Install pulleys and route the lower and upper cables.

Weight Stack Assembly (200 LB;250 LB)

Assemble the selected weight stack configuration.

Cable Routing and Tensioning

Route cables through multiple pulleys and adjust tension.

Final Component Attachment

Secure set screws and attach final components like covers.

Final Checks and Ongoing Maintenance

Post-Assembly Tightening and Testing

Verify all connections and test machine functionality.

Routine Maintenance Procedures

Guide rod lubrication and cable tension adjustments for longevity.

REP PRA-1700-S Specifications

General

Brand	REP
Model	PRA-1700-S
Category	Fitness Equipment
Language	English