FT-3000 assembly instructions
parts Included:
-2 Main Frame Sides
-2 Horizontal Back Crossmembers
-1 Multi-Grip Pull-up Bar
-Muscle Diagram Plate
-2 Sets of Weight Supports
(spacers and bumpers) and Rods
-2 High Low Uprights
-2 Pulley Carriages
-2 Weight Stacks
-2 Cables
-2 Handle Attachments
-2 Curtain Sets
-2 Top Shroud Sets
-Ball, Rubber Spacer & Metal Stopper x2
Hardware Included:
M12x35
Hex Screw x 20
Flanged
Washer
x 20
.5 in
Washer
x 8
Nut
x 4
.4 in
Washer
x 4
Lock
Washer
x 20
Screw Cap
x 20
Attach horizontal crossmembers and multi-grip
pull-up bar to the back of the frame.
1.
3.
Slide pulley carriages onto the high-lows. Next secure
high-lows to the frame. The screw that secures the bottom
of the high-low comes pre-assembled.
2.
x20
x20
x20
x20
(M12x35)
(M12x35)
M8x30
Buttonhead
Screw x 4
Set up weight supports and insert guide rods to
prepare for weight stacks.
x4
x4
x4
x2
(M8x30)
M8x10
Buttonhead
Screw x 4
M8x30 Cuphead
Screw x 2
x2
(This hardware comes preassembled.)
x4
x4
Denver, CO(720) 420-1731
Any issues? Please contact us directly by phone: 720-420-1731, email: info@repfitness.com or
morse code...(.-. . .--. ..-. .. - -. . … …). We are always here for our Customers! - Team REP
M8x20
Buttonhead Screw
+ Washer - x 28