22
4. MAINTENANCE
4.1 GENERAL INFORMATION
This chapter contains the complete list of requirements and procedures relating to the maintenance to be carried out.
Good maintenance involves ordinary maintenance, through checks and inspections carried out directly by the operator and/or
by personnel trained in normal maintenance, and periodic maintenance, which includes cleaning and replacement operations
carried out by personnel trained for the purpose.
When carrying out cleaning, maintenance or repair work, take care not to release into the environment products used for
cleaning, maintenance and repair operations, at the end of the work, restore and correctly fix all protections and guards
removed or opened.
If you do not understand the information or procedures in this chapter, please contact LF for further information before
proceeding.
WARNING
Do not carry out any intervention, modification or repair of any kind other than those indicated in this manual. Only technical personnel
trained or authorised by the manufacturer have the necessary knowledge of the system and experience to carry out any intervention
with the appropriate technique.
WARNING
All maintenance workers must act in full compliance with accident prevention regulations and must wear protective gloves and shoes
to move or remove objects that may cause injury.
NOTICE
All maintenance operations must be carried out with the system in a safe state of shutdown and disconnected from the sources of
energy and power.
To Next Page
Loading...
