9
• After about 20 seconds without pressing any keys, an audible key lock will sound and a key icon will light up on the timer
(Key lock function).
• The softener in the construction phase is programmed to default to the following data.
REGENERATION TIME
• Regeneration time: h 02,00 > 02 - 00
TIME
• Current time 12 - 00
FREQUENCY
• Regeneration frequency: 1 - 03
NOTE
N.B: This means that 1 regeneration process will occur every 3 days.
NOTE
N.B. This value may not be up to date due to failure to power the valve for more than 7 days. If it is not updated, adjust the current time.
To Next Page
Loading...
