RC3000 Antenna Controller Chapter 3 Detailed Operation
121
The values for the time parameters may be altered by the actions described next.
1-DATE ENTER DATE DD.MM.YY
This action allows the user to manually set the date. The prompt indicates that the / delimiter for date is
entered by using the (decimal point) key.
2-TIME ENTER TIME HH.MM.SS
This action allows the user to manually set the system time. The prompt indicates that the : delimiter for
time is entered by using the (decimal point) key.
3-SYNCH
If valid GPS UTC data is being received, pressing the 3 key will cause system time to be synchronized
with the current GPS UTC.
4-ZONE ENTER
3 LETTER TIME ZONE
The user may enter three alphanumeric characters (ex. CST) for a timezone designator.
5-OFFSET ENTER
TIMEZONE OFFSET <-11/+12 HOURS>
The user may enter the number of hours of offset from system time for offsetting displayed time.
To Next Page
Loading...