RESEARCH CONCEPTS RC3000 - Waveguide Switch

RC3000 Antenna Controller Chapter 2 Installation
39
2.2.12 Waveguide Switch
J12 (DB-15 Female on backpanel) connects the optional waveguide switch (RC3KF-WG-DRV1) module
to a waveguide switch of the type shown in the following diagram.
Drive Out 1,2 provide 28 VDC to energize the waveguide switch.
NOTE: The RC3000 (3.2.1.2) assumes the waveguide switch’s position 1 is the horizontal (H)
position. If the H and V positions need to be reversed, both the position volts (9/10 and 14/15) and
the position indicator (3 and 4) lines need to be swapped.