Keep your factory features and expand your
level of in-riding connectivity with
Soundstream V2 and iDatalink Maestro RR.
When your V2 receiver is installed in a compati-
ble motorcycle using the iDatalink Maestro RR
interface (sold separately), you’ll be able to
enjoy the performance and features of the V2
receiver plus touchscreen control over key
factory audio features.
Soundstream V2 supports factory functions via
the iDatalink Maestro RR interface including:
Steering Wheel Controls, Gauges, Motorcycle
info, Media Player (including USB ports),
Hands-Free Telephone, Voice Commands,
Satellite Radio.
Beside, user canuse the handle bar to control
every mode GUI via cursor.
You can access the radio source provided for
the motorcycle. The motorcycle information
and many OEM systems such as steering
controls, rider safety systems, and etc. can be
displayed on Soundstream V2 by connecting
the optional iDatalink adaptor. It is also possible
to add visual screen such as gauges, motorcycle
information. However, an extra interface
module is required to access these features.
Note: Since the type of module varies depend-
ing on the motorcycle model, search for your
motorcycle via the following URL to determine
which features are available for each module.
Remember to select the correct radio model for
accurate results.
http://maestro.idatalink.com/support
Important:
-For details about motorcycle models that are
compatible with iDatalink adaptor, refer to the
information on our website.
-After installing the iDatalink adaptor, be sure to
check that it operates properly.
-Functions and displays vary depending on the
motorcycle model. For details on the function
available for each model refer to the informa-
tion on our website.
-For trouble shooting information about
iDatalink functions, visit the following website:
http://maestro.idatalink.com/support
Limitations
- The data is transmitted to this product from
your motorcycle system via connected iDatalink
adaptor. Therefor, the actual data connects
displayed on your product may differ from the
contents on the screen described in this
manual.
-When information on your motorcycle or on
the devices in your motorcycle is sent from the
iDatalink Maestro module, a screen notifying
you of such information may pop-up.
Before using and/ or connecting the iDatalink
Maestro adaptor, you will need to first flash the
Maestro RR module with the appropriate
motorcycle and Soundstream V2 firmware.
1. Find the device number (7 characters) on the
label on the packaging of this
product or on the product itself.
2. Access the following website and follow the
on-screen instructions to configure the desired
firmware.
http://maestro.idatalink.com/
Note:
When the serial number input is required, input
the device number of this product.
3. Install the motorcycle Soundstream V2
firmware on your iDatalink Maestro module.
4. Connect this product to the iDatalink Maestro
and install this product to the motorcycle.
The iDatalink function will be active.
Using iDatalink
Activating iDatalink Maestro
iDataLink Maestro
iDataLink Maestro
75
To Next Page
Loading...