ResMed AIRCurve 10 ST User Manual

ResMed Confidential Proprietary Information, not to be reproduced or made available to third parties
without prior consent from ResMed and
not to be used in any unauthorised way.

ResMed Ltd 2016.
DOC NO 378015
PAGE 4 of 35
SPECIFICATION
– PRINTED MATERIALS
REV 5
Object ID 18953:
The use of accessories other than those specified for the device is not
recommended. They may result in increased emissions or decreased immunity of
the device.
Technical Specifications – Sound Values updated according to D000-0245r35 Machines Data for
TechComms
Values for SlimLine/Standard and humidification have been removed
Technical Specifications – FCC ID Object 18625:
Update web address to www.ResMed.com/ProductSupport
Technical Specifications –
Displayed values
Values updated according to D000-0245r35 Machines Data for
TechComms
The row for Target Minute ventilation has been deleted.
Technical Specifications –
Pressure accuracy
Values updated according to D000-0245r35 Machines Data for
TechComms
Technical Specifications –
Operating pressure range
Included ST & T.
Technical specification -
Supplemental Oxygen
Included ST & T.
REVISION 2
Backwards compatible change / Changes trigger new document numbers for published multis
Section Heading Summary of change
All
• Technical review: 378013-6#1
• Latest branding applied.
Introduction Reworded.
Accessories
• Removed External Battery
• Updated “DC/DC Converter” to “Air10 DC/DC Converter”.
Screens Updated to meet with latest User Interface specification D370-046r2 and
D370-034r2 (add “Mask” to patient essentials menu, remove arrow from
“Mask Fit” and centre text on “Stop Mask Fit” bar).
Therapy data Updated wording to align with Wireless wording in the ROW User Guides.
Use term “cellular communication” instead of “on-demand wireless
communication”.
Removing the SD card Added SD card logo to images in this section.
Troubleshooting
• Update problem (string) and solution: “high leak detected, check your
water tub, tub seal or side cover” - air tubing and mask fit solutions
removed.
• Update solutions for: “High leak detected, connect your tubing”. Water
tub and water tub seal siolutions removed.
• Added new problem and solution “My screen and lights are flashing”.
Starting therapy Added sentence about light sensor at end of this section.

ResMed AIRCurve 10 ST Specifications

General

Sound Level	26.6 dBA
Data Storage	SD Card
Ramp Feature	Yes
Device Type	BiLevel Positive Airway Pressure Device
Pressure Range	2–25 cm H2O
Humidifier	Integrated HumidAir Humidifier
Operating Mode	CPAP, S, ST
Heated Tubing	Optional
Expiratory Relief	Yes
Ramp Time	0 to 45 min (5-min increments)
Display	Color LCD
Power Supply Range	100-240V AC, 50-60Hz