Need help?Do you have a question about the ResMed HumidAir and is the answer not in the manual?
General| Heating Plate Material | Aluminum |
|---|---|
| Humidification Type | Heated Humidification |
| Compatibility | ResMed AirSense 10 |
| Water Capacity | 380 ml |
| Humidification Levels | 1-8 |
| Power Supply | Integrated with CPAP device |
Details recommended water types for humidifier use, specifically mentioning France.
Explains how to adjust the humidifier's humidity level for optimal comfort.
Provides step-by-step instructions for adjusting the humidity level via the device interface.
Instructions on how to safely detach the humidifier from the main device.
Guidance on weekly cleaning procedures for the humidifier using mild detergent.
Advises on regularly inspecting the humidifier for any signs of damage and replacement criteria.
Instructions for reassembling the humidifier seal and lid after cleaning or maintenance.
Addresses common problems like dry nose or mouth and suggests solutions.
Explains common device messages and their corresponding troubleshooting steps.
Provides essential safety warnings regarding electrical hazards, water use, and cleaning agents.
Provides guidance on how to pack and transport the device when travelling.
Details environmental conditions, physical dimensions, materials, and temperature ratings of the device.
Presents test results for humidifier performance under various mask pressure settings.
Explains the meaning of various symbols that may appear on the product or packaging.
To Next Page
