Need help?Do you have a question about the ResMed VPAP III, VPAP III ST, VPAP III ST-A and is the answer not in the manual?
General| Brand | ResMed |
|---|---|
| Model | VPAP III, VPAP III ST, VPAP III ST-A |
| Category | Humidifier |
| Language | English |
Identifies the target audience and required qualifications for using the manual.
Explains the basic principle of Nasal CPAP therapy for sleep apnea.
Details the capabilities and pressure ranges of the VPAP III and VPAP III ST systems.
Outlines the advanced bi-level therapy features of the VPAP III ST-A model.
Describes the integrated heated humidification unit for VPAP systems.
Explains the clinical therapy management module for enhanced patient insights.
Lists significant software updates and their features for VPAP models.
Outlines the steps for a general check of the flow generator's condition.
Lists necessary tools and software for performing inspections and tests.
Identifies and explains the function of various software control buttons.
Describes the keypad layout and function keys for VPAP III and ST-A models.
Provides instructions for cleaning the exterior of the flow generator unit.
Details the procedure for saving the unit's current patient settings.
Guides visual inspection of the flow generator's exterior for damage.
Outlines checks for internal components and connections when the unit is opened.
Instructions for replacing the air filter cartridge.
Procedure to verify the functionality of the unit's keypad buttons.
Steps to perform pressure calibration using the service software.
Procedure to calibrate the flow readings of the unit.
Tests the performance and operation of the blower motor.
Verifies the functionality of the unit's audible alarm system.
Tests specific alarm functions on the VPAP III ST-A model.
Tests the unit's operation using a DC power source.
Verifies the proper connection and function of the HumidAire 2i humidifier.
Instructions for restoring patient settings from a saved file.
Guides filling out the service record for completed maintenance.
Instructions for documenting and reporting any identified product issues.
Illustrates and identifies the external parts of the flow generator unit.
Provides steps for disassembling the flow generator to access internal components.
Detailed instructions for removing the front muffler component.
Steps for safely detaching the front interface panel assembly.
Instructions for removing the air filter from the unit.
Guides on how to remove the top housing of the flow generator.
Detailed procedure for replacing the main blower motor unit.
Instructions for replacing the connectors for the blower assembly.
Steps to replace the fuse in specific VPAP models.
Procedure for replacing the internal power supply unit for VPAP III/ST.
Procedure for replacing the internal power supply unit for VPAP III ST-A.
Detailed instructions for replacing the main printed circuit board.
How to set the unit's serial number and default configuration after PCB replacement.
Procedure for replacing the main cable harness assembly.
Steps to replace the power switch on specific VPAP models.
Instructions for applying warning decals to new bottom cases.
Procedures for replacing individual components within the interface assembly.
Steps for reassembling the flow generator unit after repairs.
Detailed instructions for replacing parts of the front muffler assembly.
Section dedicated to the HumidAire 2i humidifier.
Steps to disassemble the HumidAire 2i humidifier.
Instructions for taking apart the humidifier's water chamber.
Focuses on disassembling and reassembling the water chamber lid.
Details procedures for the water chamber base and its components.
Procedure for replacing the latch mechanism on the water chamber.
Lists part numbers and images for external case components.
Details available spare parts for the air filter assembly.
Lists components and part numbers for the unit's interface panel and display.
Identifies internal parts like blowers and mounts with their part numbers.
Lists Main PCBs and associated components with part numbers.
Lists part numbers for power supply units for different VPAP models.
Details part numbers for main wiring harnesses and related connectors.
Lists miscellaneous parts like tubing and connectors not fitting other categories.
Lists spare parts specific to the HumidAire 2i humidifier.
Lists part numbers for humidifier tub assemblies and docking stations.
Lists various accessories and their part numbers for the humidifier.
Highlights critical safety warnings and precautions during calibration.
Lists necessary tools and software for performing calibration procedures.
Identifies the buttons used for initiating calibration tests in the software.
Detailed steps for calibrating the pressure measurement system.
Procedure to calibrate the flow measurement of the device.
Specific calibration for motor noise on VPAP III ST-A models.
Lists technical specifications for VPAP III and VPAP III ST models.
Lists technical specifications for the VPAP III ST-A model.
Explains the meaning of symbols used on the device and its packaging.
Lists the parts and tools needed for the noise reduction upgrade.
Detailed steps for applying foam pads to reduce blower noise.
Instructions for securing wiring and replacing a blower connector.
To Next Page
