Need help?Do you have a question about the ResMed Lumis 100 VPAP ST and is the answer not in the manual?
General| Device Type | VPAP ST |
|---|---|
| EPAP | 4 to 25 cm H2O |
| Pressure Support | 0 to 20 cm H2O |
| Pressure Range | 4 to 25 cm H2O |
| Modes | CPAP, S, ST |
| Humidifier | Optional |
| Power Supply | 100-240V AC |
| IPAP | 4 to 25 cm H2O |
| Ramp Time | 0 to 45 minutes |
| Target Tidal Volume | Variable |
| Backup Rate | 5 to 30 BPM |
| Sound level | 26 dBA |
| Tidal Volume | Not specified in official documentation, but device supports monitoring. |
| Breathing Rate | Not specified in official documentation, but device supports monitoring. |
To Next Page
