EasyManua.ls Logo

ResMed AirFit N30i User Manual

ResMed AirFit N30i
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ResMed Confidential Proprietary Information, not to be reproduced or made available to third parties
without prior consent from ResMed and not to be used in any unauthorised way.
ResMed Ltd 2018.
DOC NO 638139
PAGE 1 of 111
SPECIFICATION
PRINTED MATERIALS
REV 2
Rev Change
Note
Date
document
drafted
Document prepared by
(Name)
Document Checked by
(Name)
1 K000888-00 01 May 2018 Terence Dang Lisa Oliver (or delegate, refer to change note)
2 K001673-00 30 Jul 2018 Terence Dang Lisa Oliver (or delegate, refer to change note)
AirFit N30i User Guide EUR1 Multi
1. ORACLE DESCRIPTION
AIRFIT N30I UG EUR1 MUL
2. TRANSLATION DESCRIPTION
Refer to the Change History on the English source listed for summary of changes in each version.
Rev English source This translation replaces…
1 638027r1 GLO Eng Ref + Change History below. N/A
2 638027r1 GLO Eng Ref + Change History below N/A
3. PRINT DETAILS
Print according to master spec R001-7406
4. CHANGE HISTORY
This only applies when this document is revised without a change to the related English Reference.
REVISION #2
Section Heading Summary of change
Spec page -
Print details
Update print details to reference master spec R001-7406.
Reprocessing
statement
Replace SLM reprocessing statement with generic mask reprocessing
statement.
SLM processing statement (applies to AMER region only):
Only Sleep Lab Mask (SLM) variants of the AirFit N30i mask system are intended for multi-patient re-use. When using
between patients, these masks must be reprocessed according to cleaning and disinfection instructions available on
ResMed.com/downloads/masks.
Generic mask reprocessing statement (applies to ROW regions):
Reprocess this mask when using between patients. Cleaning, disinfection and sterilization instructions are available on
ResMed.com/downloads/masks. If you do not have internet access, please contact your ResMed representative.

Other manuals for ResMed AirFit N30i

Question and Answer IconNeed help?

Do you have a question about the ResMed AirFit N30i and is the answer not in the manual?

ResMed AirFit N30i Specifications

General IconGeneral
Cushion MaterialSilicone
ManufacturerResMed
Mask TypeNasal Cradle
Headgear IncludedYes
Size OptionsSmall, Medium, Wide
Compatible DevicesCompatible with most CPAP machines
WeightApprox. 2.08 oz

Summary

Product Overview and Initial Setup

Intended Use

Details the intended patient population and usage environments for the mask.

Before Using Your Mask

Instructions for initial inspection and preparation before the first use.

Mask Operation

Fitting Your Mask

Step-by-step guide on how to put on and initially position the mask.

Adjusting Your Mask

Guidance on fine-tuning the fit for comfort and seal.

Mask Maintenance

Disassembling Your Mask for Cleaning

Steps to take apart the mask for cleaning purposes.

Cleaning Your Mask

Instructions for cleaning the mask components on a weekly basis.

Reassembling Your Mask

Guide to putting the mask components back together after cleaning.

Safety Information

Warnings

Critical safety information and potential risks associated with mask use.

Cautions

Important advisories and precautions for safe and effective mask operation.

Technical Specifications

Mask Setting Options and Compatibility

Information on device settings and compatible devices for the mask.

Performance Data

Details on pressure-flow curve, resistance, and sound levels.

Environmental and Service Information

Operating/storage conditions and service life of the mask.

Additional Information

Storage, Disposal, and Warranty

Guidelines for proper storage, disposal, product symbols, and consumer warranty.

Related product manuals